🔥 Crаzу Dеаlѕ Facon 12V RV Dimmer Switch, PWM Touch Dimmer Switch with Indicator Light, 12V / 24V Switch use with LED Lights, Incandescent and Halogen Bulbs for RV, Camper, Marine, and Strip Lights Simple review
So you can check out the other reviews at Amazon.com
only with $ 15.99
| Operating Voltage | 12 Volts (DC) |
| Brand | Facon |
| Switch Type | Touch Switch |
| Material | Metal |
| Item Dimensions LxWxH | 1.2 x 1.2 x 0.67 inches |
| Circuit Type | Dimmer Switch |
| Mounting Type | Wall Mount |
| Control Method | Touch |
| Color | Chrome Wall Switch W/Blue Indicator |
| Wattage | 36 watts |
- This PWM Touch Dimmer Switch Compatible to Use with LED Lights, Incandescent , Halogen bulbs and LED Strip Lights with Only 12Volts or 24Volts DC Power Supply
- Full Range of Brightness Control: Hold - Dim to Bright; Touch - On & Off. Max Rate up to 36 Watts with 12Volts or 72 Watts with 24Volts Power, 3 Amps to Use with Single or Multi-lights
- Installed in the Standard 4-Wires Configuration: First Connect the IN+ & IN- to DC 12 Volts or 24Volts Power Supply; then Connect the OUT+ & OUT- to Your Lamps. If your RV only have 1 wire, and it is positive wire. Please connect the white wire(negative(-) wire) to the metal frame on your RV / Camper / Trailer.
- Replace Your Existing On&Off Switch with this NEW Technology Wall Mount & Panel Touch Dimmer Switch to Create Low-Light Ambiance. Make sure the voltage is 12Volts or 24 Volts DC.
- Please Note - Many RV Light Wwitches only interrupt the 12V positive wire. This dimmer requires you to connect the negative wires also (positive in, positive out, negative in, negative out, as labeled on the wires). If you can’t locate the negative wire going to your lights, this dimmer won’t work
Product Description
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| LED Puck Light | Touch Dimmer Switch | Touch Dimmer Switch | Touch Dimmer Switch | Touch Dimmer Switch | Touch Dimmer Switch | |
| Voltages | 12V DC | 12V DC | 12V / 24V DC | 12V / 24V DC | 12V / 24V DC | 12V / 24V DC |
| Watts | 4 Watts | 60 Watts | 36 Watts / 72 Watts | 36 Watts / 72 Watts | 36 Watts / 72 Watts | 36 Watts / 72 Watts |
| Size(Inch) | Dia: 4 1/2'' x H 1'' | 2.6'' x 1.6'' x 0.6'' | Dia: 1 3/4'' x H 5/16'' | Dia: 1 3/4'' x H 5/16'' | Dia: 1 1/5'' x H 5/8'' | Dia: 7/8'' x H 5/8'' |
| Dimmer | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| On&Off Switch | ✓ | ✓ | ✓ | ✓ | ✓ | |
| Installation | Recessed Mount | Flush Mount with Screws | Flush Mount with 3M Tapes | Flush Mount with 3M Tapes | Flush Mount or Recessed Mount | Recessed Mount |
Touch Dimmer Switch with Blue Indicator Light
- Voltage: 12V / 24V DC
- Dia: 1 1/5'' x H 5/8''
- Finish: Chrome
- Install: Available for Flushed Mounting and Recessed Mounting
- Comment Use with LED Lights, Incandescent and Halogen bulbs
- Up to 36 Watts / 72 Watts to Used with Single or Multi-lights
- Touch - On/Off
- Hold - Dim/ Bright
- Comes with Blue Indicator Light
Recesssed Mount Touch Dimmer Switch
- Voltage: 12V / 24V DC
- Dia: 7/8'' x H 5/8''
- Finish: Chrome
- Install: Recessed Mounting
- Comment Use with LED Lights, Incandescent and Halogen bulbs
- Up to 36 Watts / 72 Watts to Used with Single or Multi-lights
- Touch - On/Off
- Hold - Dim/ Bright
ELECTRICAL CONNECTIONS
First connect the dimmer to power supply
- Connect black dashed line wire(s) with “INPUT -” mark from the dimmer to the neutral wire of the supply circuit.
- Connect White wire(s) with “INPUT +” mark from the dimmer to the live wire of the supply circuit
Then connect the dimmer to your lights
- Connect black dashed line wire(s) with “OUTPUT -” mark from the dimmer to the white wire(s) of LED lamps.
- Connect white wire(s) with “OUTPUT +” mark from the dimmer to the black wire(s) of LED lamps
Easy Installation
- Stick the touch dimmer inside or beneath the wood board(or other insulation material like marble) with the 3M adhesive sticker (Included)
- Fixed the touching area with a Touch Signed sticker (Included) on the surface of the wood board against to the dimmer switch area.
- Control the light by touch on the surface of wood board
TOUCH INSTRUCTION
- A.When the dimmer is connected, it will be at OFF status.
- B. For turning on the light, land a short click on the touch area. For turning off, do it again.
- C. To Dimming after turning on, keep the finger on touch pad, dim the brightness from low to high
- Or vice versa, and after reaches the highest or lowest brightness, it will start dim again
- To turning off after dimming, leave the finger from touch pad for more than 1 second and touch again
- D. At the OFF status, keep the finger on touch pad, the lights will be dimming from low to high
- The dimmer has a memory function
- When the light turns on, the brightness will be at the status of the last time when it was turns off
How to replace a old dimmer with 2 wires only
Normally, a dimmer switch have 4 wires: 2 wires connect to power and 2 wires connect to lights.
But some dimmer switch only have 2 wires, because the positive wire from the power and the lights was connected together.
Please refer to this wiring instructions, if your old dimmer comes with 2 wires only.
If your RV only have 1 wire, and it is positive wire.
Please connect the white wire(negative(-) wire) to the metal frame on your RV / Camper / Trailer.
Troubleshooting :
1. If the light can not turn on, check the polarity of the 2 wires on the light fixture. Are they reversed?
2. If the light can not turn off by additional wall switch. check the polarity of the wires on the dimmer. Are they reversed?
3. If the light flicker frequent. check the max wattage of your vehicle power. There is too much load. Use lower wattage lamps or reduce the quantity of lamps.
Rесеіvе Thе Sресіаl Prісе Hеrе :
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut Facon 12V RV Dimmer Switch, PWM Touch Dimmer Switch with Indicator Light, 12V / 24V Switch use with LED Lights, Incandescent and Halogen Bulbs for RV, Camper, Marine, and Strip LightsThе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 85% fоr реорlе whо buу Facon 12V RV Dimmer Switch, PWM Touch Dimmer Switch with Indicator Light, 12V / 24V Switch use with LED Lights, Incandescent and Halogen Bulbs for RV, Camper, Marine, and Strip Lights рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------